Mechanik, insbesondere Strukturmechanik und Strukturberechnung

Laborausstattung des FG SMB

Diverse PC-Messelektronik zur elektronischen Messung mechanischer Größen wie Dehnungen, Kräfte, Drücke, Verschiebungen, Beschleunigungen, Feuchtigkeit, Schall, Temperaturen. In unserem strukturmechanischen Labor können wir aufgrund der vorhandenen Infrastruktur eine Vielzahl von unterschiedlichen Messaufgaben bearbeiten. Dabei können wir nicht nur auf unsere Erfahrung im Messgerätebau zurückgreifen, sondern auch auf unsere eigene Werkstatt, die eine Fertigung vor Ort ermöglicht.

Hydropulsanlage

Kurzbeschreibung

Our hydropulse system can be used to perform quasi-static and dynamic stress tests on components with dimensions of several meters. The core of the system is a displacement-controlled hydropulse cylinder with a maximum nominal load of 400 kN. The stroke of the cylinder is 250 mm, although larger displacements can be achieved by means of appropriate deflection devices. There are a total of 5 longitudinal cylinders and 2 rotary cylinders.

Forschungsservice

  • Material examination and testing
  • Lifetime testing
  • After consultation
     

Shaker in verschiedenen Größen

Kurzbeschreibung

The properties of many components and assemblies are strongly dependent on the ambient temperature. Our test setup combines the testing of components at a vibration excitation and at controlled ambient conditions, in many industries this test is mandatory.

  • Forces: from 0.1 kN to 22 kN
  • Temperature range: from -70 to +180°C
  • Humidity 10...98 % r. h.
  • Climatic operation: from 10 to 95°C

Prüfmaschinen für die statische Materialprüfung: Trebel UPM 40

Kurzbeschreibung

Tensile test is one of the most important tests to characterize the properties of a material. Our universal testing machine can also perform compression, bending, shear and folding tests with a test load of up to 400 kN.

Forschungsservice

  • Material investigation
  • Material testing according to: DIN EN ISO 6892-1, DIN 50 110, DIN EN ISO 12737
  • After consultation

Laser-Doppler-Scanning-Vibrometer (PSV-400)

Kurzbeschreibung

Laser Doppler scanning vibrometry can be used to experimentally investigate the dynamic behavior of structures. It is a fast, imaging method for the non-contact measurement of vibrations, for example in vehicle, aircraft and machine constructions, in microsystems and data technology. The measurement system is characterized above all by powerful measurement, analysis and presentation software. The presentation of the measurement results by animated videos facilitates the visualization of the vibration modes. The determination of operating vibration modes and eigenmodes can be carried out over a wide frequency range.

Forschungsservice

  • Structural dynamic and acoustic investigations on structures and machines
  • Modal analysis
  • Operational vibration measurements
  • After consultation

Klimaschrank Weiss WK600

  • Temperature range: from -70 to +180°C
  • Test chamber capacity: approx. 600 liters
  • Humidity 10...98 % r. h.
  • Climatic operation 10 - 95°C
  • Temperature change per time
  • Cooling down approx. 3 K/min
  • Heating up approx. 4 K/min