direkt zum Inhalt springen

direkt zum Hauptnavigationsmenü

Sie sind hier

TU Berlin

Inhalt des Dokuments

Laboratory equipment at SMB

Hydropulse System

Brief description

Our hydropulse system can be used to perform quasi-static and dynamic stress tests on components with dimensions of several meters. The core of the system is a displacement-controlled hydropulse cylinder with a maximum nominal load of 400 kN. The stroke of the cylinder is 250 mm, although larger displacements can be achieved by means of appropriate deflection devices. There are a total of 5 longitudinal cylinders and 2 rotary cylinders.

Lupe
Lupe
Lupe

Research service

  • Material examination and testing
  • Lifetime testing
  • After consultation


Testing Machines for Static Material Testing: Trebel UPM 40

Brief Description

Tensile test is one of the most important tests to characterize the properties of a material. Our universal testing machine can also perform compression, bending, shear and folding tests with a test load of up to 400 kN.

Lupe
Lupe

Research service

  • Material investigation
  • Material testing according to: DIN EN ISO 6892-1, DIN 50 110, DIN EN ISO 12737
  • After consultation

Laser-Doppler-Scanning-Vibrometer (PSV-400)

Lupe

Brief description

Laser Doppler scanning vibrometry can be used to experimentally investigate the dynamic behavior of structures. It is a fast, imaging method for the non-contact measurement of vibrations, for example in vehicle, aircraft and machine constructions, in microsystems and data technology. The measurement system is characterized above all by powerful measurement, analysis and presentation software. The presentation of the measurement results by animated videos facilitates the visualization of the vibration modes. The determination of operating vibration modes and eigenmodes can be carried out over a wide frequency range.

Research service

  • Structural dynamic and acoustic investigations on structures and machines
  • Modal analysis
  • Operational vibration measurements
  • After consultation

 

 

Lupe
Lupe

Shaker in Different Sizes

Brief description

The properties of many components and assemblies are strongly dependent on the ambient temperature. Our test setup combines the testing of components at a vibration excitation and at controlled ambient conditions, in many industries this test is mandatory.

Lupe
Lupe
  • Forces: from 0.1 kN to 22 kN
  • Temperature range: from -70 to +180°C
  • Humidity 10...98 % r. h.
  • Climatic operation: from 10 to 95°C

Climate Cabinet Weiss WK600

  • Temperature range: from -70 to +180°C
  • Test chamber capacity: approx. 600 liters
  • Humidity 10...98 % r. h.
  • Climatic operation 10 - 95°C
  • Temperature change per time
  • Cooling down approx. 3 K/min
  • Heating up approx. 4 K/min
Lupe
Lupe

Various Devices

Various PC measurement electronics for electrical measurement of mechanical quantities such as strains, forces, pressures, displacements, accelerations, humidity, sound, temperatures. In our structural mechanics laboratory, we can handle a variety of different measurement tasks due to the existing infrastructure. Here we can not only rely on our experience in the construction of measurement equipment, but also on our own workshop, which allows on-site production.

Zusatzinformationen / Extras

Direktzugang

Schnellnavigation zur Seite über Nummerneingabe